SUPERSTRUCTURE Flat base on the front in 9.000 mm -13.600 mm sizes ,also it is 2.440 mm wide inside and 2.550 mm wide outside
Platform has 4 or 5 caps and they had been installed on the rack
Caps are 800-900 mm high.
Platform does turno ver process for one or two directions
Platform is covered with quality plain sheet of 4 or 5 mm ST Ereğli
Pneumatic locking system is enabled while the platform stands still and it is disabled before turno ver process
HYDRAULIC Damper is operated by using level 7 heavy type 3*4 telescpoic cylinder (LIFT COLD DRAW SEAMLESS PIPE)
 Oil reservoir has suction filter , damper pneumatic remote ,two speed elevating valve and a limit control security.
Gas  tank must be added to trailer ,hydraulıc contact beetween trailer and conveyor is provided by 2 sockets
RACK Strengthened ‘’I’’ section centre members are welved by submerged welding machine automatically .They are welded beetween 120/12 mm under or upper flat steel and 5 mm hub flate.
These racks are supported  against twisting by binding with axle beams
AXEL SHAFT 3 axle shaft with the capacity of 12 tons are used
There are brake shoes and heavy brake levers suitable to TSE norms
Parabolic double deck 2 springs and dashpots
ELEVATING FRONT AXEL SHAFT Remote operated elevating system for frontt axle shaft in cabin.
TIRES AND RIMS      385/65 R22 ,5 tires 6+1
11,75 x  22,5    rims 6+1
ELECTRIC EQUIPMENT It is suitable for SAE standards and Tüv regulations
Electricity is provided by 7 pin plug from vehicle.

There are neceasary  traffic advisory and stoplights an both sides

There are backlights,brake lights,licence plate lamps ,trailer reflectors ,and orange warnnig lights  on the sides
BRAKE EQUIPMENT 71/320/ewg brake system according to EC standards
Automatic slacks,4 spring brake chambers  and 2 service brake chambers
RRS that provides safe driving system against 2S /2M EBS aand rollover (Balance control system)
Air leaks in trailer are blocked by Sweden patented Ruffles union system
KING -PIN Steel king-pins which is 2’ according to DIN 74080 standards and 3 ½ ‘’ 42CRMO4 according to 74083 standards are used
LEGS Two speed ,telescopic,mechanical conveyor legs,with the capacity of 24 tons.
PAINT Rack and superstructure are painted in paint drying oven by Washing+Sanding+ 2+1 coat Acrylic Paint
COLOR It will be specified according to customer request
STANDARD  ACCESORIES Multi –piece plastic fenders that covers traling axle shaft tires
2 plate   tool boxes
Control panel (Mob,airclock , Access ramp lever )
Plastic water tank
1 basket stare tire conveyor
Aliminum bike impact absorber
Mounting and mounting space
OPTINAL SPECIFICATIONS European axle shaft group all kind of equipments.
Import  plates(Domex-Hardox)
Aluminum rims
Double spare tire conveyor
Axle shaft elevator addition
Fire extinguisher closet and fire extinguisher tube
Tire mark according t request
RAL color codes according to request






Company Name

COPYRIGHT Ada Makina Kiralama Nakliyat ve Dış Tic Ltd Şti